The least intrusive way to know everything’s ok
Monitor mum or dad remotely without needing cameras in every room. No answer on the phone? Motion alerts and activity tracking provide peace of mind, or can give you an early indication something's not right
See all benefitsThe least intrusive way to know everything’s ok
Elderly care redefined
No blind spots, not blocked by walls. A single zone covers up to 120m2. *
Analyses daily movement & identifies trends. Trends can give you an early indication that something's not right.
Guided setup ensures optimal placement of Sensing Plugs to create a zone. No hub required, Sensing Plugs plug into regular wall sockets.
Immediately alerts you to activity at key entry points.
Distinguishes between human and other movement based on intensity & velocity.
Monitors rooms in which you might not want a camera.
When paired with a Philips Home Safety Camera, respond to unusual activity by activating the siren or 2-way talk.
Meaning only one device needs to be within WiFi range.
Whether it’s motion where there shouldn’t be, or no motion where there should.
In addition to the clever sensing technology, the plug can act as a remote controlled power switch for any device plugged into it. Controlled via the home safety app or compatible smart home ecosystem.
What's in the box
3 x Sensing Plugs, 1 x Door Sensor with mounting tape attached, 1 x Quick Start Guide
Sensing Plug
Wi-Fi Sensing
Up to 120M² for 3 sensing plugs (not blocked by walls)*
3 levels: Pet Friendly (excludes small pets or big pets) or no pets (detects all motion)
End-to-end encryption
App or Manual on/off button
Wi-Fi router with a 2.4Ghz Wi-Fi network, 802.11b/g/n
Android 8.1 or higher, iOS 14.5 or higher
70.0 x 55.0 x 60.2mm
97g
2 to 12m
0 to 10m
Indoor
Do not place near large metal objects for example next to microwave, refrigerator
Yes, to indicate pairing and smart plug on/off
-10 to 45°C
Integrated wall plug, AC 230V ~ 50/60Hz
Wi-Fi 2.4Ghz, Thread
Works with Philips Security Cameras
Initial plug placed within 10 m of router, Sensors then 3 to 10 m apart
What's in the box
3 x Sensing Plugs, 1 x Door Sensor with mounting tape attached, 1 x Quick Start Guide
Sensing Plug
Wi-Fi Sensing
Up to 120M² for 3 sensing plugs (not blocked by walls)*
3 levels: Pet Friendly (excludes small pets or big pets) or no pets (detects all motion)
End-to-end encryption
App or Manual on/off button
Wi-Fi router with a 2.4Ghz Wi-Fi network, 802.11b/g/n
Android 8.1 or higher, iOS 14.5 or higher
70.0 x 55.0 x 60.2mm
97g
2 to 12m
0 to 10m
Indoor
Do not place near large metal objects for example next to microwave, refrigerator
Yes, to indicate pairing and smart plug on/off
-10 to 45°C
Integrated wall plug, AC 230V ~ 50/60Hz
Wi-Fi 2.4Ghz, Thread
Works with Philips Security Cameras
Initial plug placed within 10 m of router, Sensors then 3 to 10 m apart
Door Sensor
Works ONLY together with Philips sensing plugs
Yes
2cm
Mounting tape included
3VDC, 1 x CR2477 replaceable battery included (1000mAh)
2 years with 30 triggers per day
Thread only (connects to plug)
< 10 m from one of the plugs. Transmitter & Magnet placed with maximum 2 cm gap on door & indoor frame
Must be within 3 metres for onboarding, up to 20 metres in use
Transmitter, 50.5 x 32.0 x 21.9mm Magnet, 27.0 x 12.0 x 12.4mm
34g
-10 to 45°C
Indoor
On home entry doors – front door, back door, sliding door
Service
Yes